mmmm, boost! Updates Feb 24th 2010

[EsotericImage]

(01-19-2010 09:14 AM)James_902 Wrote:  

(01-19-2010 01:26 AM)darktuner Wrote:  yeah but there expensive as fawk. i dont have 4K to drop on a turbo kit. i want to be able to piece together a kit not have BAR and CARB tell me what i can have. and trust me i have my smog license CARB and BAR suck big time. they like to change the laws and not tell anyone untill you get caught for it and then "oh yeah didnt we tell you?"

The most expensive thing left is going to be getting a downpipe made.

I have Greg @ Go=Autoworks fabbing a New downpipe for me for a great price. Tell him i sent ya and he might cut ya a break.

http://go-autoworks.com/



edit: if you have skills you can buy a 2 J pipes and cut them and fab your own DP.

Start with the Flange off and make the 1st turn down and back..

then mount the flange on the turbo and you can pretty much measure and eyeball the rest.

[James_902]

I know a guy that's been doing exhaust work for 30 plus years so I'm going to get him to make the down pipe & dump tube for the wastegate. He'll give me a good price on it so I couldnt see it being over $350 for both. I'll take some pics tomrrow of recent work!

[EsotericImage]

ok werd

[James_902]

Did A few more things, picked a few more things up.
Omni Power 4 bar map sensor

DSM blue top injectors installed

Painted a spare valve cover I had, I'm going to get it powder coated silver I think. It didn't turn out that well but I didn't put much time into it haha

a few pics of the piping


Got my dump tube made & picked up a flange for the downpipe

Mounted my resistor box & wired it into the wiring harness, I have the engine harness out of the car right now.

Got 8 feet of fuel line for vaccum lines, hopefully I don't need more!

Integra seats

[EsotericImage]

wow, that dump tube looks like it wont fit... i would make this stuff when the motor is in the car. What happened to the dipstick housing? looks like it got cut...

[00em1]

damn, maybe down the road ill boost my em1 and start a build thread. gl with the build op

[James_902]

Yea the dump tube probably isn't going to fit, this is the kinda *poopy* that happens on your first turbo build lol. I'll have to get it bent again, there's 2 or 3 inches inbetween the turbo and dump tube so I can get it made closer to the turbo. The dipstick housing is just bent that way so I can use the dipstick, it wont fit inbetween the manifold logs. The motor that's in my car now is the one I'm going to be boosting. The one on my engine stand is just a bare bloack with my other head on it to mock up parts.

[EsotericImage]

I would have it turn towards the pass side then start the turn down...that way youll have room.