Thread Rating:
  • 3 Vote(s) - 3 Average
  • 1
  • 2
  • 3
  • 4
  • 5
post up what you're fabricating
as soon as I can get pictures off my phone I'll post some things up.
http[Image: 20130810_135318.jpg]

[Image: IMG-20120127-00309.jpg]

[Image: 20130810_110911.jpg]
Diving cages?
[Image: 69zt.png]
whatever that is, i wish i can weld lol
DOMAN!EJ8 Project Thread:[/align]
Looks like bottle holders for a cluster setup. I've built a few holders that look similar for 16 bottle nitrogen clusters at work.
ya there bottle racks for fresh air, they hold twelve bottles and get a stainless steel manifold on the inside top. we would do about ten or twenty a week after there built we have them galvanized and weld in wheels.

the picture we're I'm welding ifs on a 6 pack trailer if you look where the Mickey mouse cutout is there goes a gauge set up goes

someone gave us the finished length and that didn't include the pvc liner so we had to cut one side and take out a quarter inch out notice my weld on the right.
[Image: 20130803_104030.jpg]

[Image: 20130803_104322.jpg]

[Image: 20130803_112730.jpg]
notice in that /\ picture I did not weld that

I did these
[Image: 20130803_172422.jpg]
here's a somewhat better picture of the bottle trailer.
[Image: 20130810_110401.jpg]

it's upside down I was welding the bottom out
here's a cool down trailer were building
[Image: 20130816_155022.jpg]

those things in the back corners hold water jugs and up front it gets a misting fans, and in the middle it gets benches.
Had to fan up 3 manifold setups for a new spray system on one of our machines.

Mmmmmmm. 3/32 7018 running it hot.
[Image: IMG_20130824_234609_047.jpg]

[Image: IMG_20130824_234656_254.jpg]

[Image: IMG_20130824_230026_310.jpg]

Had to make 3 of these things so I got to put my new hood through its paces.

Users browsing this thread: 1 Guest(s)

About EJ8 Squad