Announcements

Thread Rating:
  • 3 Vote(s) - 2.33 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Turbo guys with air conditioning help.
#11
Ok thanks.
Reply
#12
I'll snag a pic tomorrow of my setup.

Turbo and AC.
[Image: 2wheel_500x200_zpsbedpcptg.jpg]
▫ #B34RSQUAD77 ▫ TallyImports.com ▫ Dixie SCCA STC #34 | Dixieland Imports SMF #188 ▫
TrackTUNED ▫ @srslyartyg ▫ Feeling Sticky Decals #FeelingStickyDecals ▫ EJ8Squad #737
Reply
#13
Any chance you got the pics?
Reply
#14
(08-11-2013, 11:07 PM)Whitecivic Wrote:  Any chance you got the pics?

D'oh! I've got some underhood work to do tomorrow so I'll snag'em then.
[Image: 2wheel_500x200_zpsbedpcptg.jpg]
▫ #B34RSQUAD77 ▫ TallyImports.com ▫ Dixie SCCA STC #34 | Dixieland Imports SMF #188 ▫
TrackTUNED ▫ @srslyartyg ▫ Feeling Sticky Decals #FeelingStickyDecals ▫ EJ8Squad #737
Reply
#15
Ok. No big deal.
Reply
#16
Without further ado:

2.5" Downpipe Clearance with AC Compressor
[Image: E1F526A2-368C-4B92-B871-FF4402A288F6-144...e59e03.jpg]


Wrapped OEM Lines "slightly massaged" and moved out of the way of the dump tube. If you look closely you will see that some of the insulating wrap has actually melted/burned away from close contact of the downpipe. That hasn't affected the operation of the AC System.
[Image: 078C996C-1331-4DA1-B860-04414ADF43AC-144...386b5d.jpg]


And the OEM fan was replaced by a slim fan and converted to a pusher not a puller. Fan is more efficient as a puller but this had to accomodate the turbo.
[Image: 544C8E3A-404B-454F-9644-55936446A840-144...a113ab.jpg]

If you have any more questions please post-up and I will do my best to respond!
[Image: 2wheel_500x200_zpsbedpcptg.jpg]
▫ #B34RSQUAD77 ▫ TallyImports.com ▫ Dixie SCCA STC #34 | Dixieland Imports SMF #188 ▫
TrackTUNED ▫ @srslyartyg ▫ Feeling Sticky Decals #FeelingStickyDecals ▫ EJ8Squad #737
Reply
#17
Yea I thought about switching the fan to a push. I have the same type of fan but its close to the turbo. Enough that when 1 of the plastic mounts broke the fan moved maybe 2" and the motor wire melted.
Reply
#18
i know this is a lil bit old but my first setup work good with ac. A nissan t25 turbo and stock ac fan.
The next setup will be a t3 turbo, with ac. I have a go autowork v2 castiron manifold and it gives lots of room.

Pix in my signature.
Wiring Master. I also have ShopKey for 89-2002 so if you need diagrams or help PM me.
xile6 on PSN i play alot of killzone, battle field, and socom.
"she said she needed a 710 cap"
MY EJ8 Build Thread
MY turbo AC build
Reply
 




Users browsing this thread: 1 Guest(s)

About EJ8 Squad