how can i adjust the ride height? do i need to adjust the top coil/ring (the one that spring sits on) or just the bottom collar (the part that bolts to the rear lower control arm or the piece that goes into the shock fork in the front). i wanna dumped my car thnks..

Function & Form coilovers can be adjusted in two ways. You can adjust the actual body of the coil up as the whole shock body is threaded or you can move the lower of the two adjusting "rings" down however far you want to move it, then move the upper "ring" down onto the lower one and tighten it by moving each "ring" in opposite directions until they're tight. PM me if you have any other questions on this as I have Funtion&Form Type 2 coilovers and they're very similar.

ait thnks!

so in order to adjust the bottom collar do u need to take out the whole coilover from the control arm? let me know thnks

This post was last modified: 06-30-2008 07:52 PM by jdm2envy.

yes, in order to adjust the body of the coilover you need to take it off the control arm, if it's the front you can just loosen the bolt and move it that way. I'd suggest getting your car at a height your comfortable with (driving in winter if your in a snow area) and then adjust the coils with the spring adjustment points from there.

ic ic! i got it now..thnks

no problem man, anytime

this is what the guy said from the store! "you can adjust them installed in the car.. excellent product and service".. "the complete unit spins in and out of the lower collar by using the supplied "keys" while its fully installed...

ok!... i thought u have to remove the bolt from the control arm in order to adjust the lower collar... i dont get it... newaiz..

this is why pictures make things easy!!!!!!